Nordfab FLI Flanged Pressed Bend (60°) comes with pre-drilled, loose FLI flanges at each end for ease of alignment and connection to other ducting components during installation. Nordfab's FLI Flanged Pressed Bends allow airflow direction change in a run of a duct and are being used in process ventilation, dust collection, and fume extraction systems. Available in galvanised steel construction, ranging from 80 mm to 315 mm in diameter.
- Also available in 90°, 45°, 30° and 15° angles.
- Radius = 1.5 x D
- Available in sizes Ø 80 mm - 315 mm, see item numbers below
Nordfab flanged ductwork is typically used for larger diameters and used in high-pressure industrial ventilation systems where airtight connections are essential.
| ø A (mm) | Angle degree | Center line radius | Material | T mm | Weight(kg) | Item No. |
|---|---|---|---|---|---|---|
| 80 | 60 | 1.5 | Galv | 0,9mm | 1,13 | 8210002499 |
| 100 | 60 | 1.5 | Galv | 0,9mm | 1,23 | 8210002504 |
| 120 | 60 | 1.5 | Galv | 0,9mm | 1,46 | 8210002509 |
| 125 | 60 | 1.5 | Galv | 0,9mm | 1,46 | 8210002514 |
| 140 | 60 | 1.5 | Galv | 0,9mm | 1,42 | 8210002519 |
| 150 | 60 | 1.5 | Galv | 0,9mm | 1,83 | 8210002524 |
| 160 | 60 | 1.5 | Galv | 0,9mm | 2,09 | 8210002529 |
| 180 | 60 | 1.5 | Galv | 0,9mm | 2,22 | 8210002534 |
| 200 | 60 | 1.5 | Galv | 0,9mm | 3,47 | 8210002539 |
| 225 | 60 | 1.5 | Galv | 0,9mm | 4 | 8210002544 |
| 250 | 60 | 1.5 | Galv | 0,9mm | 4,53 | 8210002549 |
| 300 | 60 | 1.5 | Galv | 0,9mm | 6 | 8210002554 |
| 315 | 60 | 1.5 | Galv | 0,9mm | 6,39 | 8210002559 |
It looks like you're coming from United States.
Would you like to go to the United States site?