Quick-Fit® Sleeve Assembly 16ga

The 16ga Quick-Fit Sleeve Assembly includes 16 gauge cut Pipe (one end QF, one end raw), QF Clamp, and Quick-Fit Sleeve with black O-ring. The Sleeve Assembly is used to provide variable length adjustment in runs of Quick-Fit Pipe. The raw end of the Pipe can be trimmed during installation to complete duct spans less than 5 feet in length.

For high temperature applications, red silicone O-ring* and QF Clamp with Silicone Seal or QF Clamp with ePTFE Seal may be needed (additional cost). Specify O-ring and Clamp Seal type when ordering.

  • Galvanized steel construction (use item numbers shown below when ordering)
  • Available in diameters up to 24"
  • Optional 14 gauge galvanized construction or 20 gauge 304SS available

Request a Quote

 

Download our Quick-Fit Sleeve Assembly Product Data sheet (includes Assembly instructions)

ø A in Material T mm Length (in) Weight (lbs) Legacy Item No. Item No.
8 Galv 16ga 39 3201-08HG-100000‍ 8010006200‍
9 Galv 16ga 43 3201-09HG-100000‍ 8010006201‍
10 Galv 16ga 47 3201-10HG-100000‍ 8010006202‍
11 Galv 16ga 53 3201-11HG-100000‍ 8010006203‍
12 Galv 16ga 57 3201-12HG-100000‍ 8010006204‍
13 Galv 16ga 62 3201-13HG-100000‍ 8010006205‍
14 Galv 16ga 67 3201-14HG-100000‍ 8010006206‍
15 Galv 16ga 72 3201-15HG-100000‍ 8010006207‍
16 Galv 16ga 77 3201-16HG-100000‍ 8010006208‍
17 Galv 16ga 81 3201-17HG-100000‍ 8010006209‍
18 Galv 16ga 86 3201-18HG-100000‍ 8010006210‍
19 Galv 16ga 95 3201-19HG-100000‍ 8010006211‍
20 Galv 16ga 95 3201-20HG-100000‍ 8010006212‍
21 Galv 16ga 105 3201-21HG-100000‍ 8010006213‍
22 Galv 16ga 105 3201-22HG-100000‍ 8010006214‍
23 Galv 16ga 114 3201-23HG-100000‍ 8010006215‍
24 Galv 16ga 114 3201-24HG-100000‍ 8010006216‍

Get in touch

Contact Nordfab Americas

It looks like you're coming from United States.

Would you like to go to the United States site?